Correct Opening Method For Maintenance And Cleaning Hats!

 

Hat maintenance is a skill that every hatter must learn. During the process of wearing a hat, it is inevitable that there will be collisions. Or it may fall to the ground and place it in a stained area accidentally. When you often wear it on your head and sweat a lot, if you don't take care of it for a long time, it is easy to breed bacteria. Some of slightly low quality hats may even become moldy and have small black spots. Therefore, the maintenance and cleaning of hats is very important!

 

 

Next let the headgear bag manufacturer, who has been making hats for 11 years to tell you the following two points:

1.How should we take care of hats in daily life?

2.How to clean a dirty hat correctly?

 

 

The first and most important step in maintenance is to store the hat correctly. A good storage method and storage place can keep the version of the hat not distorted, the color not faded, and improve the service life of the hat. So how to store hats correctly?

 

 

Firstly, you need to prepare a hat storage box, which should be kept clean and dry to avoid cross contamination or mold during storage. When many hats are stacked together, put the heaviest hat on the bottom and the lighter hat on the top to prevent some hat shapes from being crushed due to weight issues between the hats. In addition, a foam pad can be placed between each hat to make the contact part of the hat have a buffer, which can further protect the hat shape.

 

 

Share a hat maintenance tips: Use a steam permer to gently steam the hat, do not steam too long each time. The steam time can be determined based on the fabric of the hat, usually in the range of tens of seconds. This method can greatly restore the shape of the hat, making it look like new.

 

 

 

After sharing the maintenance of the hat, the cleaning of the hat also needs attention.Hats are inevitably dirty during the wearing , with various degrees of stains. Different cleaning methods can be used to better protect the hat and extend its service life.

 

 

 

If there are some small stains on the hat during wearing, such as mud and dust, the stain itself is not large, only contaminated to the local position, we can use wet towels or wet wipes to wipe directly. When wiping, do not use too much force and be careful to clean along the stains and surrounding areas to avoid dirt from getting into other clean areas and causing secondary pollution.

 

 

The hat accidentally sticks to a large area of dirt, and some dirty water has penetrated into the cloth inside the hat. The best way is to wash it with water. Due to different hat materials, everyone must confirm whether their hat materials can touch water before washing!

1.Take an appropriate amount of warm water which below 40℃, put the hat in water, and soak in mild laundry detergent for 20 minutes;

2. Gently clean the dirty part of the hat with a soft brush, brushing gently and slowly from top to bottom;

3. Open the inner layer of the hat. In addition to cleaning dirt and the inside of the hat, places like sweat bands should also be carefully cleaned. This part of the fabric is directly in contact with our forehead and hair, which is very easy to penetrate sweat and breed bacteria.

4. Change the water and clean the foam on the hat. Do not use the faucet to forcefully rinse, this may change the shape of the hat, resulting in the left and right of the hat asymmetry.

 

 

After washing the hat, it can be air dried naturally or dried with a hair dryer.

1.First use a towel or absorbent paper to absorb the excess water from the hat, and then lay the hat flat. Do not twist the hat directly!

2.If it is naturally air-dried, the hat will be hung in a ventilated shadow place, and do not directly expose it to sunlight, as it may cause the hat to discolor.

3.Adjust the temperature of the hair dryer and use warm air while using a hair dryer to dry the hat.When blowing, adjust the distance between the air duct mouth and the hat appropriately, and slowly blow in one direction, so that the hot wind takes away the moisture in the hat.

Warm reminder：

Natural air drying is relatively easy to make the hat contaminated again,It is recommended to use a hair dryer to dry it and store it directly in the cabinet after blowing and shaping.

 

 

After the hat is cleaned, the hat shape of the hat with soft fabric is easy to change or fold, which needs to be adjusted later.

 

Special hat supports can be used for shaping. For those who do not have a hat support at home, balloons or waste paper balls can be used as a substitute for fixing and shaping.

 

 

So much for sharing. As a daily accessory that accompanies us, hats make our outfits more diverse and exquisite. Sunny days provide us with shade and UV protection, while rainy days provide us with shelter from wind and rain. We need to take good care of it and hope to accompany each other for a longer time.